Aptasensor based on high surface area covalent organic framework for simple and ultrasensitive detection of sarcosine in the diagnosis of prostate cancer.

In this study, an electrochemical aptasensor was developed for the specific detection of sarcosine using a covalent organic framework (COF). The imine-based two-dimensional COF was synthesized through a solvothermal process using terephthaldehyde and melamine. This resulted in the formation of a structure that is highly porous and has a unique surface area of 908 m2/g. The produced biosensor demonstrated a significant linear relationship between charge transfer resistance (Rct) and various concentrations of sarcosine in blood serum samples. The aptasensor had two linear ranges, spanning from 0.5 fM to 700 fM and 10 pM to 0.12 nM, respectively, with a detection limit of 0.15 fM. The incorporation of high surface area COFs in the aptasensor design offers a promising combination of sensitivity, stability, and specificity. This combination creates a valuable device for diagnosing and monitoring of prostate cancer and potentially other diseases.

Pt@Metal-Organic Framework (ZIF-8) Thin Films Obtained at a Liquid/Liquid Interface as Anode Electrocatalysts for Methanol Fuel Cells: Different Approaches in the Synthesis.

Smart membranes, nanodevices, chemical sensors, and catalytic coatings are some of the applications that make the metal-organic framework (MOF) thin films very important. Encapsulation of nanoparticles in the porous structure of MOFs can lead to the formation of effective catalysts with new unique properties and wide range of applications that may not be obtained by MOFs individually. Three main strategies, ship-in-a-bottle, bottle-around-the-ship, and in situ synthesis including the simultaneous formation of the two components, were applied for the synthesis of Pt(0)@zeolitic imidazolate framework-8 (ZIF-8) thin films at the toluene/water interface. The effects of platinum precursor transfer directions toward the interface on the properties of the films were investigated by using the [PtCl2(cod)] (where cod = cis,cis-1,5-cyclooctadiene) complex soluble in toluene as the upper phase and K2PtCl4 soluble in water as the lower phase. The six obtained films with different morphologies were applied as electrocatalysts for the methanol oxidation reaction. Considerable current density, mass activity, catalyst stability, activation energy, exchange current density, maximum power, and long-term poisoning rate are some of the advantages of the Pt(0)@ZIF-8 catalysts synthesized using the in situ strategy and K2PtCl4 as the platinum precursor. Furthermore, we report the formation of Pt@ZIF-8 nanorods at the interfaces without using any stabilizer or template. Our results suggest that the in situ strategy at the liquid/liquid interface is one of the best procedures for the synthesis of Pt(0)@ZIF-8 thin films as a suitable anode electrocatalyst for methanol fuel cells.

Tetranuclear rollover cyclometalated organoplatinum-rhenium compounds; C-I oxidative addition and C-C reductive elimination using a rollover cycloplatinated dimer.

The novel tetranuclear Pt(IV)-Re(VII) complex [Pt2Me4(OReO3)2(PMePh2)2(µ-bpy-2H)], 4, is synthesized through the reaction of silver perrhenate with a new rollover cycloplatinated(IV) complex [Pt2Me4I2(PMePh2)2(µ-bpy-2H)], 3. In complex 4, while 2,2'-bipyridine (bpy) acts as a linker between two Pt metal centers, oxygen acts as a mono-bridging atom between Pt and Re centers through an unsupported Pt(IV)-O-Re(VII) bridge. The precursor rollover cycloplatinated(IV) complex 3 is prepared by the MeI oxidative addition reaction of the rollover cycloplatinated(II) complex [Pt2Me2(PMePh2)2(µ-bpy-2H)], 2. Complex 2 shows a metal-to-ligand charge-transfer band in the visible region, which was used to investigate the kinetics and mechanism of its double MeI oxidative addition reaction. Based on the experimental findings, the classical SN2 mechanism was suggested for both steps and supported by computational studies. All complexes are fully characterized using multinuclear NMR spectroscopy and elemental analysis. Attempts to grow crystals of the rollover cycloplatinated(IV) dimer 3 yielded a new dimer rollover cyclometalated complex [Pt2I2(PMePh2)2(µ-bpy-2H)], 5, presumably from the C-C reductive elimination of ethane. The identity of complex 5 was confirmed by single crystal X-ray diffraction analysis.

Ligand-Controlled Csp2-H versus Csp3-H Bond Formation in Cycloplatinated Complexes: A Joint Experimental and Theoretical Mechanistic Investigation.

The cyclometalated platinum(II) complexes [PtMe(C∧N)(L)] [1PS: C∧N = 2-phenylpyridinate (ppy), L = SMe2; 1BS: C∧N = benzo[h]quinolate (bhq), L = SMe2; 1PP: C∧N = ppy, L = PPh3; and 1BP: C∧N = bhq, L = PPh3] containing two different cyclometalated ligands and two different ancillary ligands have been investigated in the reaction with CX3CO2H (X = F or H). When L = SMe2, the Pt-Me bond rather than the Pt-C bond of the cycloplatinated complex is cleaved to give the complexes [Pt(C∧N)(CX3CO2)(SMe2)]. When L = PPh3, the selectivity of the reaction is reversed. In the reaction of [PtMe(C∧N)(PPh3)] with CF3CO2H, the Pt-C∧N bond is cleaved rather than the Pt-Me bond. The latter reaction gave [PtMe(κ1N-Hppy)(PPh3)(CF3CO2)] as an equilibrium mixture of two isomers. For L = PPh3, no reaction was observed with CH3CO2H. The reasons for this difference in selectivity for complexes 1 are computationally discussed based on the energy barrier needed for the protonolysis of the Pt-Csp3 bond versus the Pt-Csp2 bond. Two pathways including the direct one-step acid attack at the Pt-C bond (SE2) and stepwise oxidative-addition on the Pt(II) center followed by reductive elimination [SE(ox)] are proposed. A detailed density functional theory (DFT) study of these protonations along with experimental UV-vis kinetics suggests that a one-step electrophilic attack (SE2) at the Pt-C bond is the most likely mechanism for complexes 1, and changing the nature of the ancillary ligand can influence the selectivity in the Pt-C bond cleavage. The effect of the nature of the acid and cyclometalated ligand (C∧N) is also discussed.

Ligand-Mediated C-Br Oxidative Addition to Cycloplatinated(II) Complexes and Benzyl-Me C-C Bond Reductive Elimination from a Cycloplatinated(IV) Complex.

Reaction of the Pt(II) complexes [PtMe2(pbt)], 1a, (pbt = 2-(2-pyridyl)benzothiazole) and [PtMe(C^N)(PPh2Me)] [C^N = deprotonated 2-phenylpyridine (ppy), 1b, or deprotonated benzo[h]quinoline (bhq), 1c] with benzyl bromide, PhCH2Br, is studied. The reaction of 1a with PhCH2Br gave the Pt(IV) product complex [PtBr(CH2Ph)Me2(pbt)]. The major trans isomer is formed in a trans oxidative addition (2a), while the minor cis products (2a' and 2a″) resulted from an isomerization process. A solution of Pt(II) complex 1a in the presence of benzyl bromide in toluene at 70 °C after 7 days gradually gave the dibromo Pt(IV) complex [Pt(Br)2Me2(pbt)], 4a, as determined by NMR spectroscopy and single-crystal XRD. The reaction of complexes 1b and 1c with PhCH2Br gave the Pt(IV) complexes [PtMeBr(CH2Ph)(C^N)(PPh2Me)] (C^N = ppy; 2b; C^N = bhq, 2c), in which the phosphine and benzyl ligands are trans. Multinuclear NMR spectroscopy ruled out other isomers. Attempts to grow crystals of the cycloplatinated(IV) complex 2b yielded a previously reported Pt(II) complex [PtBr(ppy)(PPh2Me)], 3b, presumably from reductive elimination of ethylbenzene. UV-vis spectroscopy was used to study the kinetics of reaction of Pt(II) complexes 1a-1c with benzyl bromide. The data are consistent with a second-order SN2 mechanism and the first order in both the Pt complex and PhCH2Br. The rate of reaction decreases along the series 1a ≫ 1c > 1b. Density functional theory calculations were carried out to support experimental findings and understand the formation of isomers.

PtSn Nanoalloy Thin Films as Anode Catalysts in Methanol Fuel Cells.

Reactions of SnX2 (X = Cl, Br) with [PtMe2(bipy)], 1, (bipy = 2,2'-bipyridine), followed by NaBH4 reduction at the toluene/water interface in the presence or absence of graphene oxide support rendered PtSn nanoalloy thin films. They were characterized by powder X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. The electrocatalytical activity of the PtSn thin films was investigated in the methanol oxidation reaction. Our studies showed that the PtSn/reduced-graphene oxide (RGO) thin film gave better catalytic results for MOR in comparison to bare PtSn or Pt thin films. A maximum jf/jb ratio (jf and jb are the maximum current densities in the forward and backward scans, respectively) of 6.77 was obtained for the PtSn/RGO thin film deriving from the 1 + SnBr2 + NaBH4 sequence.

The development of an electrochemical nanoaptasensor to sensing chloramphenicol using a nanocomposite consisting of graphene oxide functionalized with (3-Aminopropyl) triethoxysilane and silver nanoparticles.

In the present research, a nanoaptasensor is proposed for electrochemical measurement of chloramphenicol (CAP). To this purpose, the nanocomposite prepared from graphene oxide and functionalized with (3-Aminopropyl) triethoxysilane/silver nanoparticles to the abbreviated AgNPs/[NH2-Si]-f-GO, was utilized to modify the glassy carbon electrode (GCE). Furthermore, the modified electrode was also investigated using the electrochemical methods such as electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The AgNPs/[NH2-Si]-f-GO nanocomposite was investigated by UV-Vis spectrophotometry. Fourier transform infrared (FT-IR) spectrometry and transmission electron microscopy (TEM). Moreover, [Fe(CN)6]3-/4 solution in the role of an electrochemical probe was applied. The AgNPs/[NH2-Si]-f-GO nanocomposite was confirmed as a good layer to covalent immobilization of aptamer (Apt) onto the GCE surface. In this sense, the DPV was used as a sensitive electrochemical technique for the measurement of CAP with an appropriate linear concentration range which was found to be between 10 pM and 0.2 µM and, with a low limit of detection, it equaled 3.3 pM. CAP which was identified in the presence of other usual antibiotics existed in the real samples.

Chelating and Bridging Roles of 2-(2-Pyridyl)benzimidazole and Bis(diphenylphosphino)acetylene in Stabilizing a Cyclic Tetranuclear Platinum(II) Complex.

The reaction of complex [Pt(Me)(DMSO)(pbz)], 1, (pbz = 2-(2-pyridyl)benzimidazolate) with [PtMe(Cl)(DMSO)2], B, followed by addition of bis(diphenylphosphino)acetylene (dppac), gave the novel tetranuclear platinum complex [Pt4Me4(µ-dppac)2(pbz)2Cl2], 2, bearing both the pbz and dppac ligands. In this structure, the pbz ligands are both chelating and bridging to stabilize the tetraplatinum framework. The tetranuclear Pt(II) complex was fully characterized by NMR spectroscopy, X-ray crystallography, and mass spectrometry, and its electronic structure was investigated and supported by DFT calculations.

Impedimetric ultrasensitive detection of chloramphenicol based on aptamer MIP using a glassy carbon electrode modified by 3-ampy-RGO and silver nanoparticle.

In this research work, a biosensor with a dual recognition system was fabricated and founded on a combination of aptasensing and the molecular imprinting union of the chloramphenicol (CAP) selective detection. CAP, is an antibiotic, was applied in veterinary and human in order to treat gram-positive and gram-negative infections. It is worth mentioning that CAP residue brings about earnest side effects on human health. According to this, in this sensing system, 3-aminomethyl pyridine functionalized graphene oxide (GO) (3-ampy-RGO) has been coated on the surface of GCE. Afterwards, the silver nanoparticle (AgNPs) was coated on the 3-ampy-RGO/GCE and, then, the CAP complex-amino-aptamer (NH2-Apt[CAP]) was attached to the AgNP/3-ampy-RGO/GCE using a kind of bonding formation of Ag-N. In this sense, it is worth noting that the resorcinol electropolymerization around the complex of aptamer/CAP would confine the complex and, then, retain the aptamer. Following the CAP removal, the MIP cavity, as it was supposed, synergistically acted with that of the embedded aptamer in order to construct a nanohybrid receptor. Interestingly, the double exact property of the molecular imprinting polymers and aptamers led to the superb sensing properties. In the mentioned system it was illustrated that the linear range was from 1.0 pM to 1.0 nM with the detection limit of 0.3 pM; consequently, as observed, it was better than or as good as other similar assays. Moreover, the mentioned system whose activity was observed in the various interferences presence showed great selectivity in detected the CAP. Finally, the designed sensor exhibited outstanding results when applied to detect CAP in milk samples.

Effects of the number of cyclometalated rings and ancillary ligands on the rate of MeI oxidative addition to platinum(ii)-pincer complexes.

Organoplatinum(ii)-pincer complexes [Pt(C^N^C)(L)] (2a; L = PPh2Me, 2b; L = pyridine (py), 2c; L = 4-picoline (pic)) are synthesized by the reaction of [Pt(C^N^C)(DMSO)], 1, with 1 equiv. of L, where HC^N^CH = 2,6-diphenylpyridine. Complexes 2 have 5d(Pt) →π*(pincer) metal-to-ligand charge-transfer bands in the visible region, which were used to easily follow the kinetics of their reactions with MeI by using UV-vis spectroscopy. An SN2 mechanism is suggested and the proposed intermediates were supported by DFT calculations. Consistent with the proposed mechanism, the rates of the reactions at different temperatures were slower for L = PPh2Me than those for L = N-donor ligands and large negative ΔS‡ values were found for all oxidative addition reactions. The rates are almost 2 times slower for L = PPh2Me as compared to L = 4-picoline because of the steric effects and the electronic effects transmitted through the ligands. To investigate the effect of the number of cyclometalated rings on the rate of MeI oxidative addition, the kinetics of the reaction of [Pt(Ph)(ppy)(py)] (Hppy = 2-phenylpyridine) and [Pt(Ph)2(py)2] (having 1 and zero cyclometalated ring, respectively) with MeI were also studied and a correlation between the number of cyclometalated rings and the rate of the oxidative addition reaction was found.

A Bridging Peroxide Complex of Platinum(IV).

The photolysis of the allylplatinum(IV) complex [PtBr(C3H5)(4-MeC6H4)2(bipy)], 1, bipy = 2,2'-bipyridine, in air yielded [{PtBr(4-MeC6H4)2(bipy)}2(µ-O2)], 2, the first diplatinum(IV) complex containing a single bridging peroxide ligand. The PtO-OPt bond distance in 2 is 1.481(3) Å. Complex 2 is thought to be formed by homolysis of the allyl-platinum bond of 1, followed by reaction of the platinum(III) intermediate [PtBr(4-MeC6H4)2(bipy)] with oxygen.

Multi-metal nanomaterials obtained from oil/water interface as effective catalysts in reduction of 4-nitrophenol.

In this study Pt and Pd-based nanostructured thin films have been successfully fabricated by room temperature self-assembly of metal nanoparticles (NPs) at the interface between toluene and water without/with using stabilizers such as graphene oxide (GO) or aminoclay (AC). Successful formation of these thin films is investigated by transmission electron microscopy (TEM), energy dispersive analysis of X-ray (EDAX) and X-ray diffraction (XRD). Catalytic hydrogenation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) was investigated using thin film nanocatalysts. The as synthesized nanostructured thin films exhibit high catalytic activity toward hydrogenation reaction of 4-NP. This study highlights the value of nano alloy thin films and their ability as catalyst in catalytic hydrogenation reaction.

Ultrasonic assisted synthesis of palladium-nickel/iron oxide core-shell nanoalloys as effective catalyst for Suzuki-Miyaura and p-nitrophenol reduction reactions.

In this study, ultrasonic assisted synthesis of Pd-Ni/Fe3O4 core-shell nanoalloys is reported. Unique reaction condition was prepared by ultrasonic irradiation, releasing the stored energy in the collapsed bubbles and heats the bubble contents that leads to Pd(II) and Ni(II) reduction. Co-precipitation method was applied for the synthesis of Fe3O4 nanoparticles (NPs). Immobilized solution was produced by sonicating the aqueous mixture of Fe3O4 and mercaptosuccinic acid to obtain Pd-Ni alloys on Fe3O4 magnetic NP cores. The catalytic activity of the synthesized Pd-Ni/Fe3O4 core-shells was investigated in the Suzuki-Miyaura CC coupling reaction and 4-nitrophenol reduction, which exhibited a high catalytic activity in both reactions. These magnetic NPs can be separated from the reaction mixture by external magnetic field. This strategy is simple, economical and promising for industrial applications.

Electrocatalytic oxidation behavior of NADH at Pt/Fe3O4/reduced-graphene oxide nanohybrids modified glassy carbon electrode and its determination.

We have developed Pt/Fe3O4/reduced-graphene oxide nanohybrids modified glassy carbon (Pt/Fe3O4/RGO/GC) electrode as a novel system for the preparation of electrochemical sensing platform. Characterization of as-made composite was determined using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), atomic force microscopy (AFM) and energy-dispersive analysis of X-ray (EDAX) where the Pt, Fe, Si, O and C elements were observed. The Pt/Fe3O4/RGO/GC electrode was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Due to the synergistic effect between Pt, Fe3O4 and RGO, the nanohybrid exhibited excellent performance toward dihydronicotinamide adenine dinucleotide (NADH) oxidation in 0.1M phosphate buffer solution, pH7.0, with a low detection limit of 5nM.

Thin film formation of platinum nanoparticles at oil-water interface, using organoplatinum(II) complexes, suitable for electro-oxidation of methanol.

A simple and effective strategy is presented to integrate individual platinum nanoparticles (NPs) into macroscopic thin films based on the reduction of organoplatinum(II) complexes [PtCl2(cod)] 1a, [PtI2(cod)] 1b (cod = 1,5-cyclooctadiene) and cis-[Pt(p-MeC6H4)2(SMe2)2] 2, at the toluene-water interface in the absence of stabilizer. Structure and morphology of the platinum NPs were characterized with X-ray diffraction (XRD), transmission electron microscopy (TEM), and selected area electron diffraction (SAED) techniques. Finally, platinum thin films were deposited on glassy carbon electrode and their electro-oxidation was investigated in the methanol oxidation reaction. Pt NPs thin films showed highly improved electrocatalytical activity toward methanol oxidation as compared with commercial platinum catalysts. The present method provides a facile and low-cost strategy toward the synthesis of different electrocatalysts of noble metals for application in fuel cells.

Oxidative addition of n-alkyl halides to diimine-dialkylplatinum(II) complexes: a closer look at the kinetic behaviors.

The n-alkyl halides, RX, were oxidatively added to the platina(II)cyclopentane complexes [Pt[(CH2)4](NN)], in which NN = bpy (2,2'-bipyridyl) or phen (1,10-phenanthroline), to give the platinum(IV) complexes [PtRX[(CH2)4](NN)], R = Et and X = Br or I; R = nBu and X = I, 1-3. The same reactions with the analogous dimethyl complex [PtMe2(bpy)] gave the expected platinum(IV) complexes [PtRXMe2(bpy)], R = Et or nPr and X = Br or I; R = nBu and X = I, 4-8. Kinetics of the reactions in benzene and acetone was studied using UV-vis spectrophotometery and a common S(N)2 mechanism was suggested for each case. The platina(ii)cyclopentane complexes reacted faster than the corresponding dimethyl analogs by a factor of 2-3. This is described as being due to a lower positive charge, calculated by density functional theory (DFT), on the platinum atom of [Pt[(CH)2)4](bpy)] compared with that on the platinum atom of the dimethyl analog [PtMe2(bpy)]. The values of DeltaDeltaS(double dagger) = DeltaS(double dagger)(acetone) - DeltaS(double dagger)(benzene) were found to be either positive or negative in different reactions and this is related to the solvation of the corresponding alkyl halide. It is suggested that in these reactions of RX reagents, for a given X, the electronic effects of the R group are mainly responsible for the change in the rates of the reactions and the bulkiness of the group is far less important.

Organoplatinum complexes containing bis(diphenylphosphino)amine as ligand: uncommon case of N-H . . . I-Pt hydrogen bonding.

The complex [PtMe(2)(dppa)], 1a, dppa = Ph(2)PNHPPh(2), which has previously been prepared as a mixture with the dimeric form [Pt(2)Me(4)(micro-dppa)(2)], was synthesized in pure form by the reaction of [PtCl(2)(dppa)] with MeLi. The aryl analogue [Pt(p-MeC(6)H(4))(2)(dppa)], 1b, was prepared by replacement of SMe(2) in cis-[Pt(p-MeC(6)H(4))(2)(SMe(2))(2)] with dppa. The reaction of the chelate complexes 1 with one equiv. of dppa afforded the complexes [PtR(2)(dppa-P)(2)], R=Me, 2a and R=p-MeC(6)H(4) 2b. The reaction of [PtR(2)(dppa)], 1, with neat MeI gave the organoplatinum(iv) complexes [PtR(2)MeI(dppa)], R=Me, 5a and R=p-MeC(6)H(4), 5b. The structure of 5a, determined by X-ray crystallography, indicated that the complex undergoes self-assembly by intermolecular N-H . . . I-Pt hydrogen bonding. MeI was also double oxidatively added to organodiplatinum(ii) complex cis,cis-[Me(2)Pt(micro-SMe(2))(micro-dppa)PtMe(2)], to give diorganoplatinum(iv) complex [Me(3)Pt(micro-dppa)(micro-I)(2)PtMe(3)], 4. The aryl analogue organodiplatinum(ii) complex cis,cis-[(p-MeC(6)H(4))(2)Pt(micro-SMe(2))(micro-dppa)Pt(p-MeC(6)H(4))(2)], 3b, was prepared by the reaction of cis-[Pt(p-MeC(6)H(4))(2)(SMe(2))(2)] with half equiv. of dppa, but 3b refused to react with MeI, probably because of the steric effects of the aryl ligands. The tetramethyl complex [PtMe(4)(dppa)], 6, was prepared either by reaction of 5a with MeLi or by replacement of SMe(2) in [Pt(2)Me(8)(micro-SMe(2))(2)] with dppa. All the complexes were fully characterized in solution by multinuclear NMR ((1)H, (13)C, (31)P and (195)Pt) methods and their coordination compared with that of the corresponding known dppm complexes.